Locate flat ground within 75 feet of your water and power source.  Check for wind and adjust position if needed.

Place the foam machine on its tripod.  Attach the handle.  Place water bins close by.

Connect the short hose from pump to the foam machine. Place pump into one of the water bins.  

Plug the pump and foam machine into extension cord reel (in OFF position).

Plug in the yellow GFCI pigtail into the power outlet, then connect to the extension cord.

Click foam machine power switch to the 'I" position. The machine should not power up yet since the extension cord reel is still OFF.

Fill both water bins, making sure the water hose with an on/off valve is at the bottom of the water bin. 

Once water bins are full, add solution (1/3 bottle per bin) and stir gently.​​

Erect barricades in front of the foam machine and water bins.

Designate a foam machine operator.  When ready to begin switch power on extension cord reel to ON to power both the foam machine and pump at once.

Once first water bin is empty (15-20 minutes) lift pump out and lower into second water bin.  Begin to fill the empty water bin and repeat Steps #7-8.  Keep repeating this back and forth process until party concludes.

​Disconnect power and hoses.  Disassemble and pack for return.  Make sure all items are returned including empty bottles.